OptiBeam
|
Wechseln nach: Deutsch

antenna parts
 
Generally

Concerning its antenna parts OptiBeam Antennatechnologies has put a lot of efforts into numerous own designed special constructions. Hereby extreme mechanical stability and an outstanding optical appearance are achieved.
All screws, nuts, washers, U-bolts etc. are of stainless steel. Each screw used at a dynamic part of the antenna is self securing. The following close up views of the most important antenna parts show their quality.

 Strahler Elementplattform   driver element platform 20-10m
     
 [Keine Beschreibung eingegeben]   element platform 40 and 30m
     
 [Keine Beschreibung eingegeben]   element platform 80m
     
 [Keine Beschreibung eingegeben]   element truss system 40m element
     
 [Keine Beschreibung eingegeben]   double V element truss system 80m element
     
 [Keine Beschreibung eingegeben]   outer boom truss support at bigger Yagis
     
 [Keine Beschreibung eingegeben]   centre boom truss support at bigger Yagis
     
 [Keine Beschreibung eingegeben]   boom segment coupler
     
 [Keine Beschreibung eingegeben]   boom to mast clamp for smaller Yagis
     
 [Keine Beschreibung eingegeben]   boom to mast plate for bigger Yagis
     
 [Keine Beschreibung eingegeben]   triband driver square tube phase line
     
 [Keine Beschreibung eingegeben]   fiveband driver square tube phase line model OB9-5
     
 [Keine Beschreibung eingegeben]   boom with installed elements
     
 [Keine Beschreibung eingegeben]   40 and 30m element coil
     
 [Keine Beschreibung eingegeben]   80m element coil
     
 80m MSS   OptiBeam 80m multi switch system SSB - CW
     
 80m MSSU   80m multi switch relay box with 6 high power relais
     
 80m UB    multi switch control box
     
 [Keine Beschreibung eingegeben]   3 KW balun on multiband Yagi
     
 [Keine Beschreibung eingegeben]   5 KW balun on multiband Yagi
     
 [Keine Beschreibung eingegeben]   5 KW balun on mononband Yagi